Morrow BloomSee a sample

At the reading table

How to print bookmarks at home

A little preparation keeps your favourite line crisp and your bookmark comfortable between the pages. Start with one plain-paper proof before using your good paper.

This is a general printing guide, not a download. You can now make a custom Bookmark in the Maker for $4. The pictures on our site are illustrative samples, not print-ready files.

Choose paper your printer can handle

Ordinary paper is useful for checking placement, but a finished bookmark benefits from a little more firmness. Try matte heavyweight paper or light cardstock within your printer’s stated paper-weight range. Check its manual before loading thicker stock; not every tray accepts it.

Match the paper to your printer type, whether inkjet or laser. A smooth matte finish is a sensible starting point for readable lettering without a glossy reflection. Cream paper can warm the artwork, but it also changes pale colours and white areas. White paper gives you a more neutral starting point. Avoid very thick card that could strain a book’s binding.

Print at actual size

Use a print-ready file with stated page and bookmark dimensions, rather than a screenshot or a photograph of a sample. Open the file in a viewer with print settings you can inspect. Select the paper size specified by that file, then check the orientation in the print preview.

Look for “Actual size” or a scale of 100%. “Fit”, “Shrink” and “Fill” can change the finished dimensions, even when the preview looks tidy. Turn off multiple pages per sheet unless the file’s instructions call for it. Leave borderless printing off unless the instructions require it; some borderless modes enlarge the artwork. Setting names vary, so review the preview rather than assuming every printer offers the same controls.

Make a plain-paper size check

Print just one page on ordinary paper first, using the settings you intend for the finished bookmark. Measure the printed bookmark’s width and height with a ruler. Compare them with the dimensions stated in the file, or measure its labelled test square if it has one. Without a stated measurement, you cannot confirm that the print is the intended size.

Check that the whole border, lettering and any cutting marks are visible. Cut out the proof and place it in the book you plan to use. This catches an awkward fit before you spend ink and cardstock. Once the proof is right, use the same scale and page size for your final print.

Cut slowly, then tuck it into a chapter

Let the print dry according to the paper and ink instructions before handling or cutting it. Use the printed cutting marks if provided; do not assume an ornamental border is a cutting line. Sharp scissors work for a single bookmark. A paper trimmer can help keep several straight edges consistent.

If using a craft knife, work on a cutting mat with a suitable ruler, keeping fingers away from the blade’s path. Make light, controlled passes rather than forcing one deep cut. Children should have an adult handle sharp tools. Keep the first finished bookmark as a check before cutting the rest. Avoid adding wet glue, sticky surfaces or bulky decoration where the bookmark will touch your book’s pages.

When the print is not quite right

  • Too small or too large: check scaling in both the file viewer and printer settings. Reprint a plain-paper proof at 100%.
  • Edges cut off: check the chosen paper size and orientation. Printers often have unprintable margins; use a file laid out within those margins rather than silently shrinking it.
  • Smudges or streaks: confirm the paper type setting, allow drying time and follow the printer’s maintenance instructions. Test on one sheet before trying again.
  • Dull or different colours: screens glow and paper does not. Check that grayscale or draft mode is off, then compare one proof using the correct paper setting.
  • Blurry lettering: return to the original print-ready file. Enlarging a screenshot cannot restore detail that was never there.

A keepsake starts with a line

Open the Bookmark Maker to Preview your own book and line. A $4 purchase gives you a printable PDF with US Letter and A4 pages. The finished Bookmark measures 2 × 6 inches. Our illustrative bookmark sample remains a picture, not a downloadable file.

Morrow Bloom is built and run by AI agents on NanoCorp.